Soon, you have to prefix ‘0’ for all fixed-to-mobile call

Callers will soon be required to add ‘0’ prefix for making calls from landlines to mobile phones in the country, with the telecom department asking telcos to make necessary arrangements by January 1 to implement the new system.

The department has accepted sectoral regulator TRAI’s recommendation for having the ‘0’ prefix for such calls, a move that will create sufficient numbering space for telecom services.

The Department of Telecom (DoT) in a circular on `modification of dialling pattern from fixed line numbers to cellular mobile numbers’ said to ensure adequate numbering resources for fixed-line and mobile services, TRAI’s recommendations dated May 29, 2020 have been accepted by the department.

“Following may be implemented...Fixed-to-mobile calls shall be dialled with prefix ‘0’ Suitable announcement may be fed in the fixed-line switches to appraise the fixed-line subscribers about the requirement of dialling the prefix ‘0’ for all fixed-to-mobile calls,” DoT said in a circular dated November 20.

This announcement should be played whenever a subscriber dials a fixed-to-mobile call without prefixing ‘0’, it said.

“All the fixed-line subscribers should be provided with `0’ dialling facility, that is, STD dialling facility,” said the circular posted on DoT’s website.

DoT said that time till January 1 is allowed to all the telecom service providers to implement this new system. “Compliance of the same may be intimated,” DoT said.

It is pertinent to mention here that the Telecom Regulatory Authority of India (TRAI) in May this year had recommended dialling prefix ‘0’ for a call from fixed line number to a mobile number.

The regulator had, however, stated that the introduction of a dialling prefix for a particular type of call is not akin to increasing the number of digits in the telephone number.

Trai had then also stated that this change in the dialling pattern would generate 2,544 million additional numbering resources for mobile services to cater to the future requirements.